Detailed Product Description

The oil used for lubrication system of generators need maintenance and treatment because it may be mixed with air, water and impurities. Otherwise, it can speed up oil quality turning bad or break down the adjuster and protection system, damage the plain journal bearing, and influence the whole machine running. 

In the past, we used pressure type and centrifugal type oil filter to get rid of impurities and water in oil for middle and small equipments. But the operation processes of those two equipments are very complex and waste oil and materials. And the efficiency of the machine is low. All of theses cant satisfy machines requires. Now, the 200MW homemade oil filter, which is composed of sedimentation box, filter box and oil collector, mainly makes use of sedimentation and purify theories. There are several separation nets in sedimentation box. Relying on the difference weight of oil and water, water is condensed to drip while passing through separation nets, and is subsided at the bottom of box then drain away by automatic water trap. Those filters whose capability and size are large exist poor water removal, dirty oil, and easily jamming filter for using. In addition, others adopt the normal vacuum purification devices, which use stereo-evaporation to get rid of water and reticulation filter to eliminate impurities. This kind of equipment eliminates trace water easily, but for serious leaking equipments, especially serious emulsified oil, is useless and cant continue work. If use TY Oil Purifier Specially for Turbine Oil, it can not only efficiently clear away the liquid water, air and impurities, but also can break emulsification so that it can purify turbine oil thoroughly

Application:

It is used for treating turbine oil to remove water, air and impurities quickly, improve oil quality, make sure adjuster and transformer system work normally and delay the maintenance period of machine.

Features:

1. Dewater and break emulsification efficiently. Remove a quantity of water and moisture. As adopt break emulsification, the oil turn to be clear.

2. Filter impurities efficiently, auto-back flush can remove a quantity of impurities and the precious material can remove the tiny particles instead of the clean device of oil system. The feature can have the serious polluted oil system recover and reach the standard of the turbine oil pollution control standard

3. Hi-autoimmunization, small, convenience, reliable, and safety.  The purifier used infrared ray liquid level auto-control system. It can run without person operating so that have simple operation and reliable. TY oil purifier is especially for turbine oil, lubricating oil, hydraulic oil and so on.

Work Principle

When purifier starting, oil is flowed into primary filter under the difference pressure between inside and outside and big impurities are removed. After heating, oil flow into secondary filter. Then oil flow into water separator after small impurities are removed. The water separator adopts a special skill which change the impaction of oil and water to speed up trace water and coagulate big water which is separated from oil and stored in water content. Oil is purified again by fine filter, the flows into vacuum pump which use stereo-evaporation removing left trace water. Vaporized water was drained away by cooler or vacuum system. When the oil was transported out by oil pump, the purification process has finished.

(oil purifier, oil purification, oil filtration, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering ,oil filtration, oil filter, petroleum machine)